模锻全称为模型锻造，将加热后的坯料放置在固定于模锻设备上的锻模内锻造成形的。
Die forging is fully called model forging. The heated blank is placed in the forging die fixed on the die forging equipment for forging.
模锻可以在多种设备上进行。在工业生产中，锤上模锻大都采用蒸汽-空气锤，吨位在5KN~300KN（0.5~30t）。压力机上的模锻常用热模锻压力机，吨位在25000KN~63000KN。
Die forging can be carried out on a variety of equipment. In industrial production, steam air hammer is mostly used for die forging on hammer, with tonnage of 5kn ~ 300KN (0.5 ~ 30t). Hot die forging press is commonly used for die forging on press, with tonnage of 25000kN ~ 63000kn.
模锻的锻模结构有单模堂锻模和多模膛锻模。如图3-13所示为单模堂锻模，它用燕尾槽和斜楔配合使锻模固定，防止脱出和左右移动；用州苗木  保定电动门 保定空压机 化粪池模具 微型蠕动泵 保定强夯 收费岛模具和键槽的配合使锻模定位准确，并防止前后移动。单模膛一般为终锻模膛，锻造时常需空气锤制坯，再经终锻模膛的多次锤击一次成形，最后取出锻件切除飞边。
The forging die structure of die forging includes single die hall forging die and multi-mode bore forging die. As shown in Figure 3-13, it is a single die forging die, which uses dovetail groove and wedge to fix the forging die to prevent falling out and moving left and right; The matching of key and keyway makes the positioning of forging die accurate and prevents it from moving back and forth. The single die chamber is generally the final forging die chamber. Air hammer is often required for forging, and then it is formed by multiple hammering of the final forging die chamber. Finally, take out the forging and cut off the flash